SHURE ULXD24DA/SM58 ไมค์ไร้สายคู่ ดิจิตอล หัว SM58 UHF 2 ช่วง 694-703 MHz และ 748-758 MHz ซอร์ฟแวร์ปรับตั้งค่า

SHURE ULXD24DA/SM58

ULXD4D

The Shure ULXD4D Dual Channel Digital Wireless Receiver offers two channels of uncompromising audio quality, RF signal stability, and advanced setup features in a space-efficient single rack unit. Digital wireless processing delivers premium 24- bit/48 kHz audio and RF spectrum efficiencies that dramatically increase the number of available compatible channels. Withan expansive set of enhanced features including AES 256-bit encryption for security and Dante™ digital networking for audio over Ethernet, the ULXD4D brings a new level of performance to professional sound reinforcement.

ULXD2

The Shure ULXD2 is a handheld wireless transmitter compatible with ULX-D® Digital Wireless Systems. Offering premium 20 Hz – 20 kHz audio quality, advanced rechargeability options, and a wide selection of interchangeable Shure microphone heads, the ULXD2 delivers uncompromising wireless performance for professional sound reinforcement applications. The ULXD2 is offered with SM58®, SM86, SM87A, Beta 58A®, Beta 87A, and Beta 87C.

FEATURES

ULXD4D

• Two receivers in a rugged 1RU metal chassis with internal power supply
• Individual gain controls, LED meters, and XLR outputs for each channel
• Up to 64 MHz tuning range (region dependent)
• Digital predictive switching diversity
• High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to30 meters
• RF cascade ports allow distribution of RF signal to another unit
• Optimized scanning automatically finds, prioritizes, and deploys the cleanest frequencies to transmitters over IR sync
• Bodypack Frequency Diversity ensures uninterrupted audio for mission-critical applications
• AES 256-bit encryption-enabled for secure transmission
• Audio summing routes both audio channels to each XLR receiver output
• Dante Domain Manager compatible
• Up to 60 dB independently adjustable gain for each channel
• Ethernet networking for streamlined frequency coordination and deployment across multiple receivers
• Wireless Workbench® 6 (WWB6) software integration for advanced coordination, monitoring, and control
• Interference detection and alerts provided on both the receiver and WWB6
• AMX®/Crestron® control
• AXT600 Axient® Spectrum Manager compatible
• Intuitive front panel LCD menu and controls with lockout feature
• Audio and RF LED meters with peak indicator
• XLR connectors with switchable mic/line output level
• Remoteable ½ wave antennas

ULXD2

20 Hz to 20 kHz range with flat frequency response (actual response is microphone dependent)
• AES 256-bit encryption-enabled for applications where secure transmission is needed
• >120 dB dynamic range
• 1, 10, and 20 mW selectable RF output power
• 5 segment battery fuel gauge
• Shure lithium-ion rechargeable battery pack provides up to 9 hours of battery life, precision metering, and zero memory
effect
• Up to 8 hours continuous use with 2 x AA batteries
• Backlit LCD with easy to navigate menu and controls
• Available with TA4M and LEMO3 input connectors
• 100 meter (300 ft) operating range
• Rugged metal construction
• Frequency and power lockout

Specifications

ULXD4D

Dimensions 44 mm × 482 mm × 274 mm (1.73 in.
× 18.97 in. × 10.79 in.), H × W × D
Weight 3.36 kg (7.4 lbs), without antennas
Housing Steel; Extruded Aluminum
Power
Requirements
100 to 240 V AC, 50-60 Hz, 0.26
A max.
RF OUTPUT
Spurious Rejection >80 dB, typical
Connector Type BNC
Impedance 50 Ω
Bias Voltage 12–13 V DC, 150 mA maximum,
per antenna
AUDIO INPUT
Gain Adjustment
Range
–18 to +42 dB in 1 dB steps
(plus Mute setting)
Configuration XLR: Balanced
(1=ground, 2=audio +, 3=audio –)
Impedance 100 Ω
Full Scale Output LINE setting= +18 dBV,
MIC setting= –12 dBV
Mic/Line Switch 30 dB pad
Phantom Power
Protection
Yes
NETWORKING
Network Interface Dual Port Ethernet 10/100 Mbps,
1 Gbps
Network
Addressing
Capability
DHCP or Manual IP address
Maximum Ethernet
Cable Length
100 m (328 ft)
CASCADE OUTPUT
Connector Type BNC: For connection of
1 additional receiver
Configuration Unbalanced, passive
Impedance 50 Ω
Insertion Loss 0 dB

ULXD2

Gain Offset Range 0 to 21 dB (in 3 dB steps)
Battery Type Shure SB900A Rechargeable Li-Ion or LR6 AA batteries 1.5 V
Battery Runtime @ 10 mW Shure SB900A: up to 9
Alkaline: 8 hours
See Battery Runtime Chart
Dimensions 256 mm × 51 mm (10.1 in. × 2.0 in.) L × Dia.
V50, V51 Bands: 278 mm × 51 mm (10.9 in. × 2.0 in.) L × Dia.
Weight 340 g (12.0 oz.), without batteries
V50, V51 Bands: 348 g (12.3 oz.), without batteries
Housing Machined aluminum
AUDIO INPUT
Configuration Unbalanced
Maximum Input Level 1 kHz at 1% THD 145 dB SPL (SM58), typical
Note: Dependent on microphone type
Preamplifier Equivalent Input Noise (EIN)
System Gain Setting ≥ +20
120 dBV, A-weighted, typical
RF OUTPUT
Antenna Type Integrated Single Band Helical
Occupied Bandwidth <200 kHz
Modulation Type Shure Proprietary Digital
Power 1 mW, 10 mW, 20 mW
See Frequency Range and Ouput Power table, varies by region