Shure SLXD35 อุปกรณ์แปลงไมค์สาย เป็นไมค์ไร้สายแบบพกพา

Shure SLXD35

FEATURES

SLXD35 SPECIFICATION

• System
  • RF
    • RF Carrier Frequency Range: 470–937.5 MHz (Varies by Region. See Frequency Range and Output Power Table.)
    • Working Range: 100 m (328 ft) Note: Actual range depends on RF signal absorption, reflection and interference.
    • RF Tuning Step Size
      • JB Band: 125 kHz
      • All Other Bands: 25 kHz
      • Varies by region.
    • Image Rejection: >70 dB (typical)
    • RF Sensitivity: −97 dBm at 10-5 BER
  • AUDIO
    • Latency: 3.2 ms
    • High-Pass/Low Cut Filter: 150 Hz, –12 dB/octave (Note: factory default is for the HPF to be off)
    • Audio Frequency Response: 20 Hz–20 kHz (+1, −2 dB)
    • Audio Dynamic Range (A-weighted, 20 Hz–20 kHz, typical): 118 dB (@1% THD)
    • Total Harmonic Distortion: <0.02%
    • System Audio Polarity
      • XLR: Positive pressure on microphone diaphragm produces positive voltage on pin
      • 2 with respect to pin 3 of XLR output.
      • TRS: Postive pressure on microphone diaphragm produces positive voltage on the tip of the 6.35 mm (1/4-inch) with respect to the ring of the 6.35 mm output.
    • Mic Offset Range: 0 to 21 dB (in 3 dB steps)
  • TEMPERATURE RANGE (Note: Battery characteristics may limit this range.)
    • Operating Temperature Range: 0°F to 122°F (−18°C to 50°C)
    • Storage Temperature Range: −20°F to 165°F (−29°C to 74°C)
    • NOTE: This Radio equipment is intended for use in musical professional entertainment and similar applications. This Radio apparatus may be capable of operating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies and RF power levels for wireless microphone products.
• SLXD3
  • Battery Type Rechargeable Li-Ion or 1.5 V AA batteries
  • Dimensions (Dia. × L): 4.9×1.6×1.6” (126× 41×41 mm)
  • Weight: 7 oz. (200 g)
  • Housing: Aluminum, Zinc Alloy, PC/ABS
  • AUDIO INPUT
    • Configuration: XLR
    • Maximum Input Level (1 kHz @ 1% THD)
      • Pad -12 dB: 20.5 dBV
      • 0 dB: 8.5 dBV
      • Boost +12 dB: -3.5 dBV
      • Note: Dependent on Microphone Type
    • Phantom Power
      • +48V (7 mA maximum)
      • +12V (15 mA maximum)
    • RF OUTPUT
      • Antenna Type: Dipole
      • Occupied Bandwidth: <200 kHz
      • Modulation Type: Shure Proprietary Digital
      • Power: 1 mW/10 mW/30 mW
      • Varies by region. See Frequency Range and Output Power Table.
    • Specific Absorption Rate (SAR): <0.17 W/kg
• SLXD5
  • Dimensions (H×W×D): 4.21×2.68×1” (107×68×25.3 mm)
  • Weight: 1.8 lb (182 g)
  • Housing: Aluminum
  • Power Requirements Battery: Rechargeable Li-Ion or 1.5 V AA batteries
  • Power Supply: SBC-DC-903 Battery Eliminator, or 5 VDC via USB-C
  • RF INPUT
    • Spurious Rejection: >75 dB (Typical)
    • Impedance: 50Ω
    • Phantom Power Protection: Yes
    • Antenna Type: 1/4 Wave Whip
  • AUDIO OUTPUT
    • Audio Frequency Response: 20 Hz – 20 kHz (+1, -3 dB)
    • Connector Type: 1/8″ (3.5 mm), ×2
    • Configuration
      • Balanced (Mono): Tip=audio +, Ring=audio –, Sleeve=ground
      • Dual Mono: Tip = left, Ring = Right, Sleeve = Ground
    • Impedance (Camera)
      • Balanced (Mono) Line: 450Ω
      • Balanced (Mono) Mic: 240Ω
      • Dual Mono Line: 400Ω
      • Dual Mono Mic: 200Ω
    • Full Scale Output Camera (Balanced Line): 15 dBV
    • Headphone: 13 mW @ 64Ω Load