Radial LX8 Line Splitter

The Radial LX8 is an 8 channel line level splitter that enables the system designer to split and isolate high output audio signals and distribute them without fear of distortion or artefact. The passive 19″ rack mount design employs ultra-high performance Jensen® transformers to handle signals in excess of +25dB. This makes the LX8 particularly useful when managing high system levels where eliminating noise due to ground loop contamination is required. The compact single RU design features a choice of XLR, D-Sub and Euro-block connectors make the LX8 easy to integrate in all types of systems.

Features

• XLR Mic Input – Standard 600Ω balanced microphone input wired in parallel with rear panel D-sub.
• ID Labels – For wax pencil makes setups easy. A great help when troubleshooting.
• -36dB Pad – Reduces sensitivity to enable line level signals to be connected without distortion.
• Ground Lift – Disconnects the ground at the auxiliary output to help eliminate ground loops.
• Isolated Out – Output provides ultra-quiet connection by eliminate hum & buzz caused by ground loops.
• Auxiliary – Direct output with front-panel ground lift switch allows hard-wire passive split to be used for monitors or broadcast feed.
• Direct Out – Output set offers choice of 25-pin D-sub connector for 8 channel cable harness or Phoenix Euroblock connection for permanent installation.
• Input – Is hardwired to the direct out to provide return path for 48V phantom power to supply condenser mics and active direct boxes.

LX8 Line Splitter Spec