SENNHEISER EM 6000

• Dimensions

44 x 483 x 373 mm

• Frequency response

30 Hz – 20 kHz (1.5 dB)

• THD, total harmonic distortion

< 0.03 % (@ 1 kHz)

• Weight

Approx. 5.2 kg

• Power consumption

Max. 35 W

• Audio output

Digital Audio outputs: AES3-2003, XLR-3: 48 kHz, 96 kHz, 24 bit

Dante™, RJ-45: 48 kHz, 96 kHz, 24 bit

Can be externally synchronized using WCLK loop-through with BNC sockets

Analog Audio Outputs: XLR-3 and 6.3 mm jack per channel (transformer balanced)

-10 dBu to +18 dBu in steps of 1 dB (2 kΩ)

• Storage temperature

-25°C to +70°C

• Operating temperature

-10°C to +50°C

• Switching bandwidth

244 MHz

• Power supply

100 – 240 V AC, 50/60 Hz

• Antenna connector

Input 2x BNC (50 Ω), 12 V DC, max. 200 mA each via antenna sockets, short circuit proof, Output 2 x BNC (50 Ω)

• Codecs

SePAC (Sennheiser Performance Audio Codec)

• Dynamic range

111 dB (A) type

• Frequency range

470 – 714 MHz

• Headphone output level

6.3 mm jack, 2x 100 mW at 32 Ω

• Image rejection

> 100 dB typ.

• Sensitivity

-100 dBm typ.

• Word clock

Input: BNC, 75 Ω

Output: BNC, 75 Ω

Sampling Rates: 48 kHz, 96 kHz

• Operating relative humidity

Operation: Max. 85% at 40°C (non-condensing)

Storage: Max. 90% at 40°C (non-condensing)

• Transmission method

Digital modulation, “LR” mode Min. frequency spacing for equidistant grid: 325 kHz

• Latency

Analog Audio Out: 3 ms

Digital Audio Out: 3 ms (AES/EBU)

• Audio codec

SeDAC (Sennheiser Digital Audio Codec)

• Network protocol

IEEE 802.3-2002 (10/100 Mbit/s), shielded RJ-45 connection

• Receiver Principle

Double superheterodyne

• Diversity principle

True bit diversity

• Encryption

AES 256

• Daisy chain outputs

2x BNC (50 Ω) 0 dB +/- 0.5 dB amplification relative to antenna inputs

• Receiving channels

2

• Daisy-chained receivers (RF)

Max. 8 EM 6000 units

• Dante™

IEEE 802.3 (1000 Mbit/s), shielded RJ-45 connection

• Power plug

3-pin, protection class I as per IEC/EN 60320-1

• Water Protection Code

The product must not be exposed to dripping and splashing (IP2X)